產品展示
聯系我們
首頁 > PET 全自動吹瓶機
2015-02-06
PET 全自動吹瓶機
Automatic blowing machine
Low cost, high efficiency, Easy installation and starting ,easy operation, easy maintenance
MJ-L series energy saving high speed bottle blowing machine .
Container type: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers.
Features
1) High Intelligence, The linear blow molding machine can be controlled through touch screen (PLC )and running status is shown on it. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
2) Conveying perform automatically with conveyor.
3) Strong penetrability ,Independent temperature control for different heating lamp to get ideal preform heating result . Each lamp position can move can go up- down and go forward-back. And perform rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4) Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.
5) A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction .
6) Ideal effect of the chilling with the chilling system.
7) Closed production zone, good self-lubrication system avoid contamination, Equipped with special designed air storage unit .
LS2-2500
LS3-3500
LS4-4500
LS6-5500
1-6 cavity
接受定制
Customization is welcoe
Main technical features 技術參數
Auto matic Blowing machine |
|
|
|
TYPE |
LS2-2500 |
LS3-3500 |
LS4-4500 |
Clamping force |
25T |
30T |
35T |
Clamping stroke |
140mm |
140mm |
140mm |
Max stretching stroke |
370mm |
370mm |
370mm |
Bottom moving stroke |
70mm |
70mm |
70mm |
No of cavity |
2 |
3 |
4 |
Theoretical output |
2000-2500BPH |
3000-3500BPH |
4000-4500BPH |
mould thickness |
200mm |
200mm |
200MM |
Space between bottle center to center |
120mm |
120mm |
120mm |
Space between tie bars (W*H) |
280*600mm |
375*600mm |
515*600mm |
Pre-Heater |
|
|
|
Voltage |
380v/3ph/50hz or according to client requirement |
380v/3ph/50hz or according to client requirement |
380v/3ph/50hz or according to client requirement |
No of heating zone |
2 section , each section 7 pcs lights |
2 section each section 7 pcs lights |
4 section each section 7 pcs lights |
Each section lamp |
length :980mm power:2000w
|
length :1200mm Power:2000w
|
length :960mm power:2000w
|
Preform holder |
58pcs |
72pcs |
96pcs |
Container |
|
|
|
Max container volume |
2L |
2L |
2L |
Neck diameter range |
15-70mm |
15-70mm |
15-70mm |
Max container diameter |
110mm |
110mm |
110mm |
Max container height |
370mm |
370mm |
370mm |
Dimension and weight |
|
|
|
Automatic Blowing machine |
2500*1500*1700mm |
3000*1500*1700mm |
3800*1500*1700mm |
Auto loader |
1500*1200*2500mm |
1500*1200*2500mm |
1500*1200*2500mm |
Total weight |
3.8T |
4.5T |
6T |
Auto matic Blowing machine |
|
TYPE |
LS6-5500 |
Clamping force |
35T |
Clamping stroke |
140mm |
Max stretching stroke |
370mm |
Bottom moving stroke |
70mm |
No of cavity |
6 |
Theoretical output |
5000-5500BPH |
Max mould thickness |
200mm |
Space between bottle center to center |
120mm |
Space between tie bars(W*H) |
750*600mm |
Pre-Heater |
|
Voltage |
380v/3ph/50hz or according to client requirement |
No of heating zone |
5 section ,each section 7 pcs lights |
Each section lamp |
length :960mm Power:2000w |
Preform holder |
112pcs |
Container |
|
Max container volume |
2L |
Neck diameter range |
15-70mm |
Max container diameter |
110mm |
Max container height |
370mm |
Dimension and weight |
|
Automatic Blowing machine |
4200*2000*1700mm |
Auto loader |
2200*1500*2500mm |
Total weight |
7T |
友情鏈接:
百度地址: 浙江黃巖東城街道梅花井路13號 電話: 13306567481 電話: 13575896814 傳真: 1484481112@qq.com
版權所有:臺州市邁杰機械模具有限公司 技術支持:云納網絡(luò ) [云納建站] 浙ICP備19050136號-1